New Cisco CCNP 300-135 TSHOOT certification exam dumps

Certqueen Cisco CCNP 300-135 TSHOOT certification exam dumps are the most thorough, accurate, and up-to-date practice test you will find on the market today. With Cisco CCNP 300-135 TSHOOT certification exam dumps, Certqueen 300-135 gives you the confidence in knowing that you will pass this difficult exam on the first try. The Cisco 300-135 exam is one of the most popular Cisco Certification exams. If you want to reach a professional or expert level in the Cisco Certification career certification tracks, Passing 300-135 exam is the first step.

Besides, Certqueen also got a high reputation in many certification industry. The the probability of passing Cisco certification 300-135 exam is very small, but the reliability of Certqueen can guarantee you to pass the examination of this probability. Some sites provide Cisco CCNP 300-135 TSHOOT certification exam dumps on the Internet, but they do not have any reliable guarantee. Let me be clear here a core value problem of Certqueen. All Cisco exams are very important.

In order to stabilize your job position, you need to constantly improve your professional ability and keep up with the pace of others to let you not fall far behind others. 300-135 Troubleshooting and Maintaining Cisco IP Networks exam is widely recognized IT certifications. People around the world prefer 300-135 exam certification to make their careers more strengthened and successful. Speaking of 300-135 Troubleshooting and Maintaining Cisco IP Networks exam, Certqueen Cisco 300-135 exam training materials have been ahead of other sites.

Share some CCNP 300-135 exam questions and answers below.
The Fault Condition is related to which technology?

A. BGP

B. NTP

C. IP NAT

D. IPv4 OSPF Routing

E. IPv4 OSPF Redistribution

F. IPv6 OSPF Routing

G. IPv4 layer 3 security

Answer: A

Ticket 5 R1ACL

TROUBLE TICKET STATEMENT:

The implementation group has been using thetest bed to do a ¡®proof-of-concept¡¯that required both client 1 and client 2 to access the Web Server at 209.65.200.241.After several changed to interface status, network addressing, routing schemes and layer 2 connectivity, at trouble ticket has been opened indicating that client 1 cannot ping the 209.65.200.241 (internet Server).

show run by yourself to obtain the following information:

Client 1 is not able to reach the WebServer at 209.65.200.241. Initial troubleshooting shows that R1 is also not able to reach the WebServer. R1 also does not have any active BGP neighbor.

Configuration on R1

! interface Serial0/0/0/1

description link to ISP

ip address 209.65.200.224 255.255.255.252

ip access-group edge_security in

ip nat outside

ip virtual-reassembly

ntp brasdcast client

net broadcast key 1

no cdp enable

!! ip access-list nat_traffic permit 10.1.0.0 0.0.255.255

ip access-list nat_traffic permit 10.2.0.0 0.0.255.255

! ip access-list edge_security deny ip 10.0.0.0 0.255.255.255 any

ip access-list edge_security deny ip 172.16.0.0 0.15.255.255 any

ip access-list edge_security deny ip 192.168.0.0 0.0.255.255 any

ip access-list edge_security deny ip 127.0.0.0 0.255.255.255 any

ip access-list edge_security permit ip host 209.65.200.241 any

On which device is the fault condition located?

A. R1

B. R2

C. R3

D. R4

E. DSW1

F. DSW2

G. ASW1

Answer: A

What is the solution to the fault condition?

A. Under the interface Tunnel34 configuration enter the ipv6 ospf 6 area 34 command.

B. Under the interface Loopback6 configuration enter the ipv6 ospf 6 area 34 command.

C. Under the interface Serial0/0/0.34 configuration enter the ipv6 ospf 6 area 34 command.

D. Under ipv6 router ospf 6 configuration enter the redistribute rip RIP_ZONE include-connected command.

Answer: D

What is the solution of the fault condition?

A. Under the ip access-list edge_security configuration add the permit ip 209.65.200.224 0.0.0.3 any command

B. Under the interface Serial0/0/1 enter the ip access-group edge_security out command.

C. Under the ip access-list edge_security configuration delete the deny ip 10.0.0.0 0.255.255.255 any command

D. Under the interface Serial0/0/0 configuration delete the ip access-group edge_security in command and enter the ip access group edge_security out command

Answer: A

What is the solution of the fault condition?

A. Under the interface Serial0/0/0 configuration enter the ip nat inside command

B. Under the interface Serial0/0/1 configuration enter the ip nat outside command

C. Under the ip access-list standar nat_trafic configuration enter the permit 10.2.0.0 0.0.255.255 command

D. Under the ip access-list standar nat_trafic configuration enter the permit 209.65.200.0 0.0.0.255 command

Answer: C

Certqueen Cisco CCNP 300-135 TSHOOT certification exam dumps can help people whose IT knowledge is not comprehensive pass the difficulty Cisco certification 300-135 exam. If you add the Cisco certification 300-135 exam product of Certqueen to your cart, you will save a lot of time and effort. Certqueen Cisco CCNP 300-135 TSHOOT certification exam dumps is developed by Certqueen experts’ study of Cisco certification 300-135 exam, and it is a high quality product. Are you worried about how to passs the terrible Cisco 300-135 exam?

Leave a Reply

Your email address will not be published. Required fields are marked *